Installation and Setup V2

• Two zip files are shipped with CTS2LE:
  • WebCts2LE-Vx.x.x-load-vocabs.zip: standard terminology sources (denoted by <VOCABS-ZIP> in the following)
  • WebCts2LE-Vx.x.x-embedded-jetty.zip: the server itself (denoted by <SERVER-ZIP> in the following)

!!! Ensure that you have sufficient privileges and a distinguished owner for all directories and files created below

!!! Ensure that Java8 is installed on the target machine

Navigator-URL: http://<host>:<port>/WebCts2LE (after installation and startup)

Linux

(A) Single (blank) instance ("... to go ...")

1. Create a directory, e.g. /etc/webcts2le/inst (denoted by <H> in the following).
2. Unzip <SERVER-ZIP> to <H>
3. Change to directory <H>
4. Run ./bin/startup.sh -port 8081 resp. run ./bin/shutdown.sh 8081

(B) Single instance with standard terminologies

1. (A).1
2. (A).2
3. Unzip <VOCABS-ZIP> to <H>/CTS2LE_resources/load-vocabs
4. (A).3
5. Run ./bin/SuperLoader.sh
6. (A).4

(C) Multiple Instances with seperate terminology location and init.d-support

1. Install a server instance
   1. Choose an instance name, e.g. 'epsos' (denoted by <I> in the following)
   2. Create directory /etc/webcts2le/<I> (denoted by <H> in the following). Note that /etc/webcts2le is required for now
   3. Unzip <SERVER-ZIP> to <H>
   4. Copy <H>/bin/webcts2le.sh to /etc/init.d/

1. Install terminology sources
   1. Create directory /home/webcts2le/load-vocabs (denoted by <V> in the following)
   2. Unzip <VOCABS-ZIP> to <V>

1. Setup standard terminologies
   1. Change to directory <H>
   2. Run ./bin/SuperLoader.sh -CTS2LE_VOCABS_ROOT <V>

1. Start/Stop all server instances
   1. Adapt, if neccessary, the BASE_PORT and CTS2LE_VOCABS_ROOT (<V>) below the line "# set this on different machines" in /etc/init.d/webcts2le.sh
   2. Run /etc/init.d/webcts2le.sh start
   3. To shutdown the server run /etc/init.d/webcts2le.sh stop

1. Start/Stop a certain server instance directly (via port)
   1. Change to directory <H>
   2. Run ./bin/startup.sh -port 8081 -CTS2LE_VOCABS_ROOT <V> resp. run ./bin/shutdown.sh 8081

Windows

(A) Single (blank) instance ("... to go ...")

1. Create a directory, e.g. C:\Program Files\webcts2le\inst (denoted by <H> in the following).
2. Unzip <SERVER-ZIP> to <H>
3. Change to directory <H>
4. Run bin\startup.bat -port 8081 resp. open Powershell and run curl -Method Post http://localhost:8081/shutdown?token=webcts2le

(B) Single instance with standard terminologies

1. (A).1
2. (A).2
3. Unzip <VOCABS-ZIP> to <H>\CTS2LE_resources\load-vocabs
4. (A).3
5. Run bin\SuperLoader.bat
6. (A).4