Installation and Setup V2: Unterschied zwischen den Versionen

Aus CTS2-LE
Zur Navigation springen Zur Suche springen
(→‎Windows)
Zeile 61: Zeile 61:
 
# Unzip '''''<SERVER-ZIP>''''' to '''''<H>'''''
 
# Unzip '''''<SERVER-ZIP>''''' to '''''<H>'''''
 
# Change to directory '''''<H>'''''
 
# Change to directory '''''<H>'''''
−
# Run <code>bin\startup.bat -port 8081</code> resp. open Powershell and run <code>curl -Method Post http://localhost:8081/shutdown?token=webcts2le</code>
+
# Run <code>bin\startup.bat -port 8081</code>
 +
# - Open Powershell and run <code>curl -Method Post http://localhost:8081/shutdown?token=webcts2le</code> or<br>- Open a Linux shell for Windows and run <code>curl -X POST http://localhost:8081/shutdown?token=webcts2le</code>
  
 
== (B) Single instance with standard terminologies ==
 
== (B) Single instance with standard terminologies ==
Zeile 71: Zeile 72:
 
# Run <code>bin\SuperLoader.bat</code>
 
# Run <code>bin\SuperLoader.bat</code>
 
# (A).4
 
# (A).4
 +
# (A).5

Version vom 31. August 2016, 21:12 Uhr

  • Two zip files are shipped with CTS2LE:
    • WebCts2LE-Vx.x.x-load-vocabs.zip: standard terminology sources (denoted by <VOCABS-ZIP> in the following)
    • WebCts2LE-Vx.x.x-embedded-jetty.zip: the server itself (denoted by <SERVER-ZIP> in the following)

!!! Ensure that you have sufficient privileges and a distinguished owner for all directories and files created below

!!! Ensure that Java8 (>= 1.8.0_92) is installed on the target machine

Navigator-URL (to see the initial state and content after setup): 

http://<host>:<port>/WebCts2LE

Linux

(A) Single (blank) instance ("... to go ...")

  1. Create a directory, e.g. /etc/webcts2le/inst (denoted by <H> in the following).
  2. Unzip <SERVER-ZIP> to <H>
  3. Change to directory <H>
  4. Run ./bin/startup.sh -port 8081 resp. run ./bin/shutdown.sh 8081

(B) Single instance with standard terminologies

  1. (A).1
  2. (A).2
  3. Unzip <VOCABS-ZIP> to <H>/CTS2LE_resources/load-vocabs
  4. (A).3
  5. Run ./bin/SuperLoader.sh
  6. (A).4

(C) Multiple Instances with seperate terminology location and init.d-support

  1. Install a server instance
    1. Choose an instance name, e.g. 'epsos' (denoted by <I> in the following)
    2. Create directory /etc/webcts2le/<I> (denoted by <H> in the following). Note that /etc/webcts2le is required for now
    3. Unzip <SERVER-ZIP> to <H>
    4. Copy <H>/bin/webcts2le.sh to /etc/init.d/
  1. Install terminology sources
    1. Create directory /home/webcts2le/load-vocabs (denoted by <V> in the following)
    2. Unzip <VOCABS-ZIP> to <V>
  1. Setup standard terminologies
    1. Change to directory <H>
    2. Run ./bin/SuperLoader.sh -CTS2LE_VOCABS_ROOT <V>
  1. Start/Stop all server instances
    1. Adapt, if neccessary, the BASE_PORT and CTS2LE_VOCABS_ROOT (<V>) below the line "# set this on different machines" in /etc/init.d/webcts2le.sh
    2. Run /etc/init.d/webcts2le.sh start
    3. To shutdown the server run /etc/init.d/webcts2le.sh stop
  1. Start/Stop a certain server instance directly (via port)
    1. Change to directory <H>
    2. Run ./bin/startup.sh -port 8081 -CTS2LE_VOCABS_ROOT <V> resp. run ./bin/shutdown.sh 8081

Windows

(A) Single (blank) instance ("... to go ...")

  1. Create a directory, e.g. C:\Program Files\webcts2le\inst (denoted by <H> in the following).
  2. Unzip <SERVER-ZIP> to <H>
  3. Change to directory <H>
  4. Run bin\startup.bat -port 8081
  5. - Open Powershell and run curl -Method Post http://localhost:8081/shutdown?token=webcts2le or
    - Open a Linux shell for Windows and run curl -X POST http://localhost:8081/shutdown?token=webcts2le

(B) Single instance with standard terminologies

  1. (A).1
  2. (A).2
  3. Unzip <VOCABS-ZIP> to <H>\CTS2LE_resources\load-vocabs
  4. (A).3
  5. Run bin\SuperLoader.bat
  6. (A).4
  7. (A).5
Abgerufen von „https://websites.fraunhofer.de/CTS2-LE/index.php?title=Installation_and_Setup_V2&oldid=564“