Installation and Setup V2: Unterschied zwischen den Versionen

Aus CTS2-LE
Zur Navigation springen Zur Suche springen
(→‎Windows)
Zeile 26: Zeile 26:
 
# Unzip '''''<VOCABS-ZIP>''''' to <code>'''''<H>'''''/CTS2LE_resources/load-vocabs</code>
 
# Unzip '''''<VOCABS-ZIP>''''' to <code>'''''<H>'''''/CTS2LE_resources/load-vocabs</code>
 
# (A).3
 
# (A).3
 +
# Ensure that the server is not running
 
# Run <code>./bin/SuperLoader.sh</code>
 
# Run <code>./bin/SuperLoader.sh</code>
 
# (A).4
 
# (A).4
Zeile 36: Zeile 37:
 
## Unzip '''''<SERVER-ZIP>''''' to '''''<H>'''''
 
## Unzip '''''<SERVER-ZIP>''''' to '''''<H>'''''
 
## Copy <code>'''''<H>'''''/bin/webcts2le.sh</code> to <code>/etc/init.d/</code>
 
## Copy <code>'''''<H>'''''/bin/webcts2le.sh</code> to <code>/etc/init.d/</code>
−
 
 
# Install terminology sources
 
# Install terminology sources
 
## Create directory <code>/home/webcts2le/load-vocabs</code> (denoted by '''''<V>''''' in the following)
 
## Create directory <code>/home/webcts2le/load-vocabs</code> (denoted by '''''<V>''''' in the following)
 
## Unzip '''''<VOCABS-ZIP>''''' to '''''<V>'''''
 
## Unzip '''''<VOCABS-ZIP>''''' to '''''<V>'''''
−
 
 
# Setup standard terminologies
 
# Setup standard terminologies
 
## Change to directory '''''<H>'''''
 
## Change to directory '''''<H>'''''
 +
## Ensure that the server is not running
 
## Run <code>./bin/SuperLoader.sh -CTS2LE_VOCABS_ROOT '''''<V>'''''</code>
 
## Run <code>./bin/SuperLoader.sh -CTS2LE_VOCABS_ROOT '''''<V>'''''</code>
−
 
 
# Start/Stop all server instances
 
# Start/Stop all server instances
 
## Adapt, if neccessary, the <code>BASE_PORT</code> and <code>CTS2LE_VOCABS_ROOT</code> ('''''<V>''''') below the line "# set this on different machines" in <code>/etc/init.d/webcts2le.sh</code>
 
## Adapt, if neccessary, the <code>BASE_PORT</code> and <code>CTS2LE_VOCABS_ROOT</code> ('''''<V>''''') below the line "# set this on different machines" in <code>/etc/init.d/webcts2le.sh</code>
 
## Run <code>/etc/init.d/webcts2le.sh start</code>
 
## Run <code>/etc/init.d/webcts2le.sh start</code>
 
## To shutdown the server run <code>/etc/init.d/webcts2le.sh stop</code>
 
## To shutdown the server run <code>/etc/init.d/webcts2le.sh stop</code>
−
 
 
# Start/Stop a certain server instance directly (via port)
 
# Start/Stop a certain server instance directly (via port)
 
## Change to directory '''''<H>'''''
 
## Change to directory '''''<H>'''''
Zeile 70: Zeile 68:
 
# Unzip '''''<VOCABS-ZIP>''''' to <code>'''''<H>'''''\CTS2LE_resources\load-vocabs</code>
 
# Unzip '''''<VOCABS-ZIP>''''' to <code>'''''<H>'''''\CTS2LE_resources\load-vocabs</code>
 
# (A).3
 
# (A).3
 +
# Ensure that the server is not running
 
# Run <code>bin\SuperLoader.bat</code>
 
# Run <code>bin\SuperLoader.bat</code>
 
# (A).4
 
# (A).4
 
# (A).5
 
# (A).5

Version vom 1. September 2016, 21:09 Uhr

  • Two zip files are shipped with CTS2LE:
    • WebCts2LE-Vx.x.x-load-vocabs.zip: standard terminology sources (denoted by <VOCABS-ZIP> in the following)
    • WebCts2LE-Vx.x.x-embedded-jetty.zip: the server itself (denoted by <SERVER-ZIP> in the following)

!!! Ensure that you have sufficient privileges and a distinguished owner for all directories and files created below

!!! Ensure that Java8 (>= 1.8.0_92) is installed on the target machine

Navigator-URL (to see the initial state and content after setup): 

http://<host>:<port>/WebCts2LE

Linux

(A) Single (blank) instance ("... to go ...")

  1. Create a directory, e.g. /etc/webcts2le/inst (denoted by <H> in the following).
  2. Unzip <SERVER-ZIP> to <H>
  3. Change to directory <H>
  4. Run ./bin/startup.sh -port 8081 resp. run ./bin/shutdown.sh 8081

(B) Single instance with standard terminologies

  1. (A).1
  2. (A).2
  3. Unzip <VOCABS-ZIP> to <H>/CTS2LE_resources/load-vocabs
  4. (A).3
  5. Ensure that the server is not running
  6. Run ./bin/SuperLoader.sh
  7. (A).4

(C) Multiple Instances with seperate terminology location and init.d-support

  1. Install a server instance
    1. Choose an instance name, e.g. 'epsos' (denoted by <I> in the following)
    2. Create directory /etc/webcts2le/<I> (denoted by <H> in the following). Note that /etc/webcts2le is required for now
    3. Unzip <SERVER-ZIP> to <H>
    4. Copy <H>/bin/webcts2le.sh to /etc/init.d/
  2. Install terminology sources
    1. Create directory /home/webcts2le/load-vocabs (denoted by <V> in the following)
    2. Unzip <VOCABS-ZIP> to <V>
  3. Setup standard terminologies
    1. Change to directory <H>
    2. Ensure that the server is not running
    3. Run ./bin/SuperLoader.sh -CTS2LE_VOCABS_ROOT <V>
  4. Start/Stop all server instances
    1. Adapt, if neccessary, the BASE_PORT and CTS2LE_VOCABS_ROOT (<V>) below the line "# set this on different machines" in /etc/init.d/webcts2le.sh
    2. Run /etc/init.d/webcts2le.sh start
    3. To shutdown the server run /etc/init.d/webcts2le.sh stop
  5. Start/Stop a certain server instance directly (via port)
    1. Change to directory <H>
    2. Run ./bin/startup.sh -port 8081 -CTS2LE_VOCABS_ROOT <V> resp. run ./bin/shutdown.sh 8081

Windows

(A) Single (blank) instance ("... to go ...")

  1. Create a directory, e.g. C:\Program Files\webcts2le\inst (denoted by <H> in the following).
  2. Unzip <SERVER-ZIP> to <H>
  3. Change to directory <H>
  4. Run bin\startup.bat -port 8081
  5. - Open Powershell and run curl -Method Post http://localhost:8081/shutdown?token=webcts2le or
    - Open a Linux shell for Windows and run curl -X POST http://localhost:8081/shutdown?token=webcts2le

(B) Single instance with standard terminologies

  1. (A).1
  2. (A).2
  3. Unzip <VOCABS-ZIP> to <H>\CTS2LE_resources\load-vocabs
  4. (A).3
  5. Ensure that the server is not running
  6. Run bin\SuperLoader.bat
  7. (A).4
  8. (A).5
Abgerufen von „https://websites.fraunhofer.de/CTS2-LE/index.php?title=Installation_and_Setup_V2&oldid=567“